OPTIMIZED THERMAL MANAGEMENT, MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE, SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
HONEYCOMB VENTS
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
MULTI COOLING SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!
Front Panel (interior) |
|
Top Panel |
|
Bottom Panel(on top of the PSU shroud) |
|
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
REMOVABLE/ADJUSTABLE CAGE SUPPORTS
2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD
2 X SSD SUPPORT BEHIND THE MOTHERBOARD
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
OPTIONAL ACCESSORIES
LANCOOL II-1X
Vertical GPU Kit Want to show your graphics card? Lancool II-1x is a perfect fit for the LANCOOL 215.
LANCOOL II-2X
Side Diffused ARGB LEDs Strip Not enough RGB? Stick the LANCOOL II-2X at the top edge of your PSU shroud.
DOWNLOAD
SPECIFICATIONS
| Product Name | LANCOOL 215 |
| Model | LANCOOL 215 X/ LANCOOL 215 W |
| Color | Black/ White |
| Dimensions | (D) 462mm x (W) 215mm x (H) 482mm |
| Motherboard | E-ATX(width under 280mm)/ATX/M-ATX/ITX |
| PSU | 210mm |
| Materials | Steel 4.0mm tempered glass |
| Incl Fans | 2 x 200MM 3-PIN 800 RPM ARGB fans (front) 1 X 120MM 3-PIN1100 RPM Fans (rear) |
| Fan Support | Front 2 x 140mm or 3 x 120mmTop 2 x 120mm or 2 x140mmTop of PSU chamber 2 x 120mm |
| Radiator | Front 1 x 280/360mm Top 1 x 240 / 280 mm |
| VGA Length | 370mm |
| CPU Clearance | 166mm |
| Drive | Behind MB Tray 2 x 2.5″ SSD Hard Drive Cage 2 x 3.5″ HDD or 1 x 2.5″ SSD |
| Slot | 7 |
| I/O Ports | Power button Reset button LED button for lighting mode control 1 xHD AUDIO 2 x USB 3.0 |
| Dust Filters | 1 x Top (magnetic), 1 x Bottom (tray) |
