AMD RDNA™ 3 Architecture
16GB of GDDR6 memory
AMD Radiance Display™ Engine
DisplayPort™ 2.1
AMD FidelityFX™ Super Resolution
AMD Radeon Super Resolution
4K and Beyond
Digital Power Design
Ultra High Performance Conductive Polymer Aluminum Capacitor
High TG Copper PCB
The GPU is mounted on to the high-density 14 layer 2oz Copper and high TG PCB to match the rapid speed, high current and increased power requirement of the GPU and memory to guarantee high stability of the PCB during operation.
Angular Velocity Fan Blade
The Angular Velocity Fan Blade provides a double layer of downward air pressure which alongside the air pressure on the outer ring of the Axial fan, results in up to 44% more downward air pressure and up to 19% more airflow for a quieter and cooler operation when compared to the previous generations.
Optimized Composite Heatpipe
The composite heatpipes are fine-tuned for each individual cooling design with optimal heat flow, efficiently and evenly spreading out the heat to the entire cooling module.
Fuse Protection
In order to protect your card, the SAPPHIRE cards have fuse protection built into the circuit of the external PCI-E power connector to keep the components safe.
Two-Ball Bearing
These feature Dual Ball bearing fans, which have an approximately 85% longer lifespan than sleeve bearings in our tests. The improvements to the fan blades means the solution is up to 10% quieter than the previous generation.
AMD RDNA™ 3
Specification :
| GPU | AMD Radeon™ RX 7800 XT Graphics Card |
| 5nm GPU | |
| AMD RDNA™ 3 Architecture | |
| Stream Processors | 3840 |
| Compute Units | 60 CU (with RT+AI Accelerators) |
| Infinity Cache | 64MB |
| Ray Accelerators | 60 |
| Memory Size/Bus | 16GB/256 bit GDDR6 |
| Displays | Maximum 4 Displays |
| Resolution | HDMI™: 7680×4320 |
| DisplayPort 2.1: 7680×4320 | |
| Interface | PCI-Express 4.0 x16 |
| Output | 2x HDMI |
| 2x DisplayPort | |
| BIOS Support | UEFI |
| Game Index | 4K |
| Sapphire Features | Digital Power Design |
| Ultra High Performance Conductive Polymer Aluminum Capacitors | |
| Fuse Protection | |
| High TG Copper PCB | |
| Optimized Composite Heatpipe | |
| Dual-X Cooling Technology | |
| Intelligent Fan Control | |
| Precision Fan Control | |
| Metal Backplate | |
| Angular Velocity Fan Blade | |
| Dual-Ball Bearing Fans | |
| TriXX Supported | |
| TriXX Boost | |
| AMD Features | AMD RDNA™ 3 Architecture |
| 60 AMD RDNA™ 3 Compute Units (with RT+AI Accelerators) | |
| 64MB AMD Infinity Cache™ Technology | |
| DisplayPort™ 2.1Support | |
| AMD Radiance Display™ Engine | |
| 16GB GDDR6 on 256-Bit Memory Bus | |
| PCI® Express 4.0 ready | |
| AMD FidelityFX™ Super Resolution technology | |
| Microsoft® DirectX® 12 Ultimate Support | |
| Microsoft® DirectStorage Support | |
| Vulkan® Optimized | |
| AMD Smart Technologies | |
| AMD Software: Adrenalin Edition™ | |
| AMD Noise Suppression | |
| AMD Privacy View | |
| AMD Radeon™ Super Resolution technology | |
| AMD Link | |
| AMD FreeSync™ technology | |
| Cooling | 2 Fans |
| Form Factor | 2.5 slot, ATX |
| Dimension: 280(L)X 128.75(W)X 52.57 (H)mm | |
| Power Consumption | 266W Total Board Power |
| OS | Linux®, Windows® 10, and Windows 11. 64-bit operating system required |
| System Requirement | Minimum 700 Watt Power Supply |
| 2 x 8-pin Power Connector. | |
| PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard. | |
| Minimum 8GB of system memory. 16GB recommended. |
**Features, Price and Specifications are subject to change without notice to customer.
